The T-Line must be installed above the user.
The 24m T-Line requires a specially trained installer to perform the installation.
For inclined installations the T-Line should be installed below the pulley.
A maximum of 30 degrees use angle is recommended.
Refer to the installation and user manuals for further instruction.
It is recommended that the 24m T-Line is installed at 5m above the work platform when at maximum span to minimise the free-fall and cable intrusion.
The 12m T-Line should be 4m above the platform
Where this is not possible then the T-Line Technical Support Team can advise on installation methods to overcome any issues.